Describe the specific part or component of this device you're working on. Ex: Battery
Create a title.
Communicate background information before the reader dives into the guide.
Step 1
Both plastic paws have a small cover underneath that is fixed with a small screw. Remove both screws.
Step 2
Once the covers underneath the paws are removed, you can lift the paws from the lower end to remove them entirely.
Step 3
Once the plastic paws are removed, four screws appear. Unscrew them to be able to remove the belly entirely.
Step 4
Once the belly is removed you can see the battery. Two wires run from the battery to a small PCB. The wires are attached to the PCB with a small connector. Gently pull the connector in direction of Fin's head to disconnect the battery.
Your contributions are licensed under the open source Creative Commons license.