Skip to main content

Linksys WRT54GS v2 Motherboard Replacement

What you need

  1. Linksys WRT54GS v2 Motherboard Replacement, Front Case: step 1, image 1 of 1
    • Turn the router over so that all four of its feet are facing upwards.

  2. Linksys WRT54GS v2 Motherboard Replacement: step 2, image 1 of 1
    • Remove the rubber inserts inside the the two purple feet located on the router's front case.

    • This may be a challenge, so try the following two methods:

    • Use a plastic opening tool. Insert the flat end of the tool into the seam and slowly pry the rubber feet out.

    • Use a metal spudger. Insert the point of the metal spudger directly into the hole of the rubber feet and pry the insert out.

  3. Linksys WRT54GS v2 Motherboard Replacement: step 3, image 1 of 1
    • Use a Phillips #2 Screwdriver to remove the two 5.8 mm screws holding the front case to the motherboard.

  4. Linksys WRT54GS v2 Motherboard Replacement: step 4, image 1 of 1
    • Squeeze the sides of the router's backcase inward and pull off the purple front case. It is helpful to have a second person assist you for this step.

  5. Linksys WRT54GS v2 Motherboard Replacement, Motherboard: step 5, image 1 of 1
    • Slide the board unit out and up.

  6. Linksys WRT54GS v2 Motherboard Replacement: step 6, image 1 of 1
    • Flip the circuit board over and use a Phillips #2 Screwdriver to remove the 6.9mm screw holding the board to the back case.

    • Slide the back cover out and away from the circuit board.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Allian Roman

Member since: 10/12/2011

276 Reputation

5 Guides authored

Team

Cal Poly, Team 3-4, Regan Fall 2011 Member of Cal Poly, Team 3-4, Regan Fall 2011

CPSU-REGAN-F11S3G4

4 Members

12 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 15

Past 30 Days: 75

All Time: 2,703