Fix Your Stuff Community Store

Tablet Chuwe 10.1 Touch Screen Replacement

Introduction

It's common to break the touch screen of your device, we are going to learn to dismount and get to the Flex cable to find out the reference number so we can order a new touch screen to substitute the broken one

What you need

  1. Tablet Chuwe 10.1 Touch Screen Replacement, Touch Screen: step 1, image 1 of 2 Tablet Chuwe 10.1 Touch Screen Replacement, Touch Screen: step 1, image 2 of 2

    • We must use a plastic guitar pick or in the case that you do not have one, a plastic card can do us helpful (credit card)

    Translate

  2. Tablet Chuwe 10.1 Touch Screen Replacement: step 2, image 1 of 3 Tablet Chuwe 10.1 Touch Screen Replacement: step 2, image 2 of 3 Tablet Chuwe 10.1 Touch Screen Replacement: step 2, image 3 of 3

    • Slowly, insert the pick pressing it and swinging it along the perimeter of the tablet's body

    Translate

  3. Tablet Chuwe 10.1 Touch Screen Replacement: step 3, image 1 of 1

    • Carefully loosen with your fingers the back and place the tablet face down on a flat and clean surface tablet

    Translate

  4. Tablet Chuwe 10.1 Touch Screen Replacement: step 4, image 1 of 1

    • the speaker is screwed next to the touch chassis, we must release the screw and place it in a visible place, the speaker will remain with adhesive tape next to the battery

    Translate

  6. Tablet Chuwe 10.1 Touch Screen Replacement: step 5, image 1 of 1

    • With the help of the pua or the fingers, we must release the data FLEX from the connection, making a small upward pressure

    Translate

  7. Tablet Chuwe 10.1 Touch Screen Replacement: step 6, image 1 of 1

    • Careful! The FLEX cable that joins the front and rear camera, will be completely loose, we must place it in a clean place for later assembly.

    Translate

  8. Tablet Chuwe 10.1 Touch Screen Replacement: step 7, image 1 of 1

    • we will have a third FLEX on the motherboard, we must do the same method to press up on the connector until it is released, carefully these FLEX are easy to break.

    Translate

  9. Tablet Chuwe 10.1 Touch Screen Replacement: step 8, image 1 of 2 Tablet Chuwe 10.1 Touch Screen Replacement: step 8, image 2 of 2

    • now with the help of a Phillips screwdriver, we must release the three screws that hold the base plate of the touch screen chassis, and the sensor with positive and negative cables, we can help with the fingers in a smooth way.

    Translate

  10. Tablet Chuwe 10.1 Touch Screen Replacement: step 9, image 1 of 2 Tablet Chuwe 10.1 Touch Screen Replacement: step 9, image 2 of 2

    • carefully, we already have the loose base plate of the touch chassis, we look at the various grips that connect the touch screen with the LCD and with the tine and small balancing we are doing pressure to separate touch and LCD screen.

    Translate

  11. Tablet Chuwe 10.1 Touch Screen Replacement: step 10, image 1 of 3 Tablet Chuwe 10.1 Touch Screen Replacement: step 10, image 2 of 3 Tablet Chuwe 10.1 Touch Screen Replacement: step 10, image 3 of 3

    • Following these steps we have loosen our LCD screen and the carcass of the touch screen, now we must look for the reference number that appears on the FLEX cable of the touch screen so we can order a new one

    Translate
Conclusion

In order to reassemble your device, follow these instructions in reverse order

14 other people completed this guide.

Special thanks to these translators:

es en

100%

irlanda

carlos

George Youssef

Luis B

+1

and 1 other...

These translators are helping us fix the world! Want to contribute?
Start translating ›

Author

with 2 other contributors

Fran Ruiz

Member since: 11/14/2015

488 Reputation

1 Guide authored

Badges: 9

+6 more badges

2 Comments

No mention of the adhesive needed to reattach the screen.

Jan - Reply

garcias por la ayuda

jorge alejandro - Reply

Add Comment

View Statistics:

Past 24 Hours: 5

Past 7 Days: 29

Past 30 Days: 88

All Time: 2,827