Fix Your Stuff Community Store

GPD WIN Silicon Pad Replacement

Introduction

GPD WIN is a very good game console.

However, I was so absorbed in it that the controller got messed up.

At this rate, you will not be able to perform any tricks or reload!

Replace the silicone pad immediately

What you need

  1. GPD WIN Silicon Pad Replacement, Remove the screw of the case: step 1, image 1 of 2 GPD WIN Silicon Pad Replacement, Remove the screw of the case: step 1, image 2 of 2

    • Remove the case screws

    Translate

  2. GPD WIN Silicon Pad Replacement, Remove case: step 2, image 1 of 3 GPD WIN Silicon Pad Replacement, Remove case: step 2, image 2 of 3 GPD WIN Silicon Pad Replacement, Remove case: step 2, image 3 of 3

    • There is a small space beside the keyboard, insert the pick and remove the claw

    • As you open the device, you can see that the flexible cable and the battery cable are connected. Then unplug the connector.

    Translate

  4. GPD WIN Silicon Pad Replacement, Remove screws on the logic board: step 3, image 1 of 2 GPD WIN Silicon Pad Replacement, Remove screws on the logic board: step 3, image 2 of 2

    • Remove screws on the logic board.

    • Because some black threads are mixed, do not forget to remove

    Translate

  5. GPD WIN Silicon Pad Replacement, Remove the wifi connector on the logic board: step 4, image 1 of 2 GPD WIN Silicon Pad Replacement, Remove the wifi connector on the logic board: step 4, image 2 of 2

    • Remove Wi-Fi antenna cable and LCD connector

    Translate

  6. GPD WIN Silicon Pad Replacement, Remove the joystick: step 5, image 1 of 2 GPD WIN Silicon Pad Replacement, Remove the joystick: step 5, image 2 of 2

    • Remove the screws of the joystick and remove the flex cable from the connector.

    • Then, it is ready to pull logic board out of the case.

    Translate

  7. GPD WIN Silicon Pad Replacement, Replace the silicone pad: step 6, image 1 of 2 GPD WIN Silicon Pad Replacement, Replace the silicone pad: step 6, image 2 of 2

    • You can access the silicone pad by removing the logic board.

    • Replace a sticky silicon pad

    Translate
Conclusion

To reassemble your device, please follow these steps in reverse order.

One other person completed this guide.

Special thanks to these translators:

jp en

100%

@HectorNavarroMX

Midori Doi

Choojoo

These translators are helping us fix the world! Want to contribute?
Start translating ›

Author

with 2 other contributors

noria901

Member since: 06/15/2018

482 Reputation

3 Guides authored

Badges: 4

+1 more badge

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 23

Past 30 Days: 74

All Time: 1,798